Introduction

Jamal PVC Pipe (Pvt.) Limited has grown from strength to strength and now entered into a new phase of manufacturing of high-density Polyethylene pipes (HDPE) for usage in transportation of Water, Gas, Fuel, Chemical, Agriculture and waste disposal networks. The newly imported state-of-the-art plant has built-in features to maintain high degree of consistency in production of PE Pipe at every stage.
Our vision is to fully meet the customer’s expectation by focusing on enhancement the quality and product demand. It is this anticipation of market needs and out unwavering commitment to ethical practices that place us as reliable source for quality products.Available from 20mm to 1200mm sizes

HDPE Pipes

Polyethylene has become the most popular material of pipe distribution systems as it offers significant benefits compared to alternative materials.
Following are the most important features of HDPE Pipes:

  • Safe for drinking water with no toxic or chemical contamination
  • High flexibility. Can be bent as much as 25-40 times of the pipe diameters, thus reducing unnecessary pipe joints
  • Light weight with only 0.95 grams/cm 2. Weigh only 1/5 of steel pipes of the same size
  • Rust proof and high resistance to damaged chemicals, making the product last up to 50 years
  • Super smooth internal surface, reducing the chance of pipe cloggage.

Our Production Facility

Our product lines include, but are not limited to the following ranges.

HDPE Pipe System Range – milimeter sizes

  • JAMAL HDPE Pipe: sizes 20 mm to 1200 mm

Durability

1. Heat Fused Joints — Benefits

HDPE pipe can be heat fused together to form a joint that is as strong as or stronger than the pipe itself and is leak free.
This eliminates the potential leak points every 10-20 feet as found with PVC and Ductile Iron bell and spigot connections.
The Life Cycle Cost of HDPE pipe differs from other pipe materials because the “allowable water leakage” is zero rather than typical leakage rates of 10 to 20% for PVC and Ductile Iron.
HDPE pipe fused joints are self restraining and costly thrust restraints or thrust blocks are not required.
HDPE pipe’s fused joints simply do not leak, eliminating infiltration and ex-filtration problems experienced with alternate pipe joints.

2. Flexible and Fatigue Resistant — Benefits

HDPE pipe can be bent to a radius 25 times the nominal pipe diameter (Example: 12” HDPE can be cold formed in the field to a 25 ft radius). This can eliminate many fittings required for directional changes in a piping system where fittings and thrust blocks or restraints are required with alternate materials. 
The flexibility of HDPE pressure pipe makes it well suited for dynamic soils including areas prone to earthquake. 
HDPE pressure pipe can accept repetitive pressure surges that significantly exceed the static pressure rating of the pipe.

3. Construction Advantages — Benefits

The combination of flexibility and leak free joints allow for unique and cost effective types of installation methods that the rigid PVC and Ductile Iron pipes can’t use with bell and spigot connections. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Slip-lining, Plow and Plant, Submerged or Floating Pipe, etc.) can save considerable time and money in most potable water applications. 
Polyethylene pipe is produced in straight lengths up to 50 foot long and coiled in diameters up through 6”. Coiled lengths over 1000 ft are available depending on size providing low cost installations.. 
Polyethylene is about one-eighth the density of steel, it does not require the use of heavy lifting equipment for installation.

4. Cost Effective, Long Term and Permanent — Benefits

Polyethylene pipe installations are cost effective and have long term cost advantages due to its physical properties, leak free joints and reduced maintenance costs. 
The polyethylene pipe industry estimates a service life for HDPE pipe to conservatively be 50-100 years. This relates to savings in replacement costs for generations to come.

5. Corrosion and Chemical Resistant — Benefit

HDPE pipe will not corrode tubercular or support biological growth.
HDPE pipe has superb chemical resistance and is the material of choice in harsh chemical environments 
The advantages of corrosion and chemical resistance over traditional metal pipes are shared by many plastic pipes, but HDPE pipe uniquely combines these attributes with the aforementioned advantages of heat fused joints, flexibility and fatigue resistance. 

6. Handling — Benefits

It is much easier to handle and install HDPE pipe vs. the heavier, rigid metallic or concrete pipe segments, allowing for huge cost advantages in the construction process. 
Polyethylene pipe is better able to structurally withstand an impact than PVC pipe, especially in cold weather installations when other pipes are more prone to cracks and breaks.

7. Ha-zen Williams C Factor is 150 and doesn’t change over time – Benefit

HDPE pipe has a smooth ID that does not corrode or tuberculin and maintains its flow capability over time. 
The C Factor of Ductile Iron pipe is dramatically reduced over time due to corrosion and/or tubercular. 
According to the Federal Highway Administration, utilities spend $36 billion annually on corrosion protection of pipes. Is your municipality contributing to these expenditures? If the answer is yes, then specify HDPE pipe. It does not corrode or tubercular, long-life cycle reduces your maintenance budget and increases your billable water.

Sewer - Force Main

Introduction

After more than 30 years of use in M&I sewer applications, polyethylene (PE) pipe is a proven solution. Independent testing of PE in sewer service for 25 years showed no significant changes in the material’s physical or chemical properties. The inherent properties of HDPE accommodate all the desired performance characteristics needed for these demanding applications:

  • Forced Sewer Mains
  • Pipeline Rehabilitation or Trench less Pipeline Replacement
  • Combined Storm and Sanitary Sewer Lines
  • Sludge Lines
  • Intake and Outfall Lines
  • Culvert Relining
  • Dig-ester Lines
  • Laterals
  • Complete Systems (Open and Closed)
  • Vacuum

Distinct Advantages

PE pipe provides several important benefits when used in sewer applications. These benefits include: 
1. Inflow and Infiltration (I & I) is totally eliminated, therefore minimizing the I & I in wet weather conditions on gravity flow systems. 
2. Total corrosion resistance. 
3. Cost-effective installation. 

Sewer and Wastewater Application

There are several distinct advantages of PE pipe that provide important benefits for sewer and wastewater applications. These benefits are listed below.

1. Heat Fused Joints – Benefits

HDPE pipe’s fused joints do not leak, eliminating infiltration and inflow problems experienced with alternate pipe joints. 
HDPE pipe can be heat fused together to form a joint that is as strong as or stronger than the pipe itself and is leak-free.
This eliminates the potential leak points every 10-20 feet as found with PVC and Ductile Iron bell-and-spigot connections. 
The Life Cycle Cost of HDPE pipe differs from other pipe materials because the “allowable water leakage” is zero rather than typical leakage rates of 10 to 20% for PVC and Ductile Iron. 
HDPE pipe fused joints are self-restraining and do not require costly thrust restraints or thrust blocks. 

2. Chemical Resistant – Benefits

PE is highly resistant to the wet, hydrogen sulfide gas and the low concentration acid found in a sanitary sewer.
PE pipe will not corrode, tubercular or support biological growth 
To review information on PE’s resistance to various chemicals. (TR-19/2000) 
Superior chemical resistance to aggressive soils.

3. Abrasion Resistant – Benefit

PE is abrasion resistant and is well suited for the solids environment in sewer applications.

4. Construction Advantages – Benefits

The combination of flexibility and leak-free joints allow for unique and cost-effective types of installation methods that the rigid PVC and Ductile Iron pipes can’t use with bell-and-spigot connections. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Slip lining, Plow and Plant, Submerged or Floating Pipe, etc.) can save considerable time and money in most applications. 
Polyethylene pipe is produced in straight lengths up to 50 feet long and coiled in diameters up through 6 inches. Coiled lengths over 1,000 feet are available (depending on size) providing low cost installations. 
Polyethylene is about one-eighth the density of steel and does not require the use of heavy lifting equipment for installation.

Mining

PE pipe Ideal for Mining Applications

For more than 30 years, polyethylene (PE) pipe’s unique characteristics have made it the product of choice for numerous applications in the mining industry. It is a proven product in rugged terrains, extreme climates, and changing site environments. Heat-fused joints create a monolithic structure that allows long lengths of pipe to be pulled from one area to another. PE pipe’s flexibility, abrasion resistance and leak-free joints have helped the product prove itself long-term in demanding environments. 
Polyethylene pipe is the accepted standard for these mining applications:

  • Solution Mining
  • Heap Leaching
  • Process Water
  • Process Slurry
  • Water Transportation
  • Tailings Transportation
  • Dust Suppression
  • Mine De-watering
  • Pit De-watering
  • Depressurization

Specific PE Pipe Advantages in Mining

When it comes to selecting pipe materials for mining applications, the two most important factors are security and reliability. The pipe must be rustproof, break-resistant and corrosion-free. It must safeguard the environment and protect the taxpayer. It must have a track record that professional engineers and installers respect.

If you want your pipe to meet and exceed those challenges, it must be polyethylene (PE) pipe.

Proven advantages of PE pipe for mining applications include:

  • Chemical and Abrasion Resistance
  • Low Cost
  • Ease of Installation
  • Pressure Surge Resistant

Chemical and Abrasion Resistance

PE pipe has proven itself over and over again in the variety of mineral process, ranging from low ph acids to high ph caustic solutions.
PE pipe has superb chemical resistance and is the material of choice in harsh chemical environments. 
PE pipe is also abrasion resistant and is well suited for the solids environment in mining applications. 

Pressure Surge Resistant

PE pipe for mining applications is semi-rigid to withstand high external loads as well as high internal pressure surges. Its flexible nature expands with pressure surges that increases the life of the pipeline and reduces maintenance costs.

Low Cost

Polyethylene pipe installations are cost effective and have long term cost advantages due to its physical properties, leak-free joints and reduced maintenance costs. 
The polyethylene pipe industry estimates the service life for PE pipe to conservatively be 50-100 years. This generates savings in replacement costs for generations to come.
In addition to the Life Cycle Capital Cost advantage of HDPE pipe, additional savings accrue to the owner because the “allowable water leakage” is zero rather than typical the leakage rates of 10% to 20% for PVC and Ductile Iron.

Ease of Installation

The combination of flexibility and leak free joints allow for unique and cost effective types of installation methods that the rigid PVC and Ductile Iron pipes can’t use with bell and spigot connections. These alternate installation methods (Horizontal Directional Drilling, Pipe Bursting, Slip lining, Plow and Plant, Submerged or Floating Pipe, etc.) can save considerable time and money in most applications. 
Polyethylene pipe is produced in straight lengths up to 50 feet long and coiled in diameters up through 6-inch. Coiled lengths over 1,000 feet are available depending on size providing low cost installations.
Polyethylene is about one-eighth the density of steel. It does not require the use of heavy lifting equipment for installation

M&I Industrial

Industrial

A pipe does more than just convey industrial liquids from one location to another. It must also be corrosion and abrasion resistant. It must be flexible and easy to install, and maintain a high flow coefficient throughout its service life of 50-100 years. And it must not leak.

With polyethylene pipe, you get all of these benefits. Because of the hazardous nature of some chemicals being transported, it is imperative that the system not leak. Heat fusing polyethylene pipe produces a leak free joint that is as strong if not stronger than the pipe itself in tension and pressure applications. These joints are self restrained. They need no thrust blocks or restraint harness except where the pipe attaches to a non-polyethylene system.

Polyethylene pipe is corrosion resistant and has a long history of use as an abrasion resistant material in mining applications. It is lightweight, easy to install, and reduces the number of fittings needed in a system because of its flexibility.

HDPE pipe is available for pressures up to 300 psi and constant service temperatures up to 140° F. Please see the chemical resistance chart in PPI TR-19 for the affects of different chemicals at different temperatures.

Applications

With excellent features, HDPE pipes have diversified applications and few of which are mentioned as below:

  • Acid / Caustic Lines
  • Brine
  • Cable Conduits
  • Chilled Water Piping
  • Coal Slurry
  • Cooling Water
  • Crude Oil
  • De-watering pipes
  • Drain Lines/Industrial Effluents
  • Dredging
  • Drilling Mud
  • Drip irrigation/ Sprinkle irrigation
  • Fire Water Mains
  • Fly ash
  • Hazardous Waste
  • Out Fall Pipelines
  • Process Piping
  • Sea Water Effluents
  • Sewage Treatment
  • Sludge Piping
  • Slurries
  • Storage tank piping
  • Underground services
  • Utility Piping
  • Water Supply and Distribution
  • Gas (manufactured as per ISO4437)
  • Compressed Air (buried)

Typical Industries Served

  • Agriculture
  • Breweries
  • Chemicals
  • Desalination / Water Treatment Plants
  • Food Processing
  • Irrigation / Agriculture
  • Marine
  • Mining / Mining Processing
  • Paint
  • Power Generation
  • Pulp/Paper/Wood
  • Refineries
  • Tanneries
  • Textile (Dyeing / Bleaching/Effluents)
  • Gas (Manufactured as per ISO4437)

ON SITE JOINTING SERVICES

We are capable enough to provide the jointing services at working site; therefore we have many jointing machines available with us & highly trained staff in order to provide services of jointing technical assistance & appropriate guidance along with trained and skilled staff for our valued customers.
We perform the jointing as per international standard i.e. ISO 4427 & 37 DVS 2207-1.